• Maximum inlet pressure: 120 PSI
• Working Temperature Range: -40 to 150 °F (-40 to 65 °C)
• Connection: 3/8 (F) NPT
• Unique “Coanda” nozzle design reduces noise by up to 6 to 20 dB over conventional blow guns
• Up to 1.9 lbs of thrust at 100 PSI
• Static pressure limited to less than 30 PSI when tip is blocked
• Maximum air consumption: 39.4 SCFM
• 3/8 (F) NPT inlet
• Wide trigger for smoother actuation and comfort grip
• Maximum Operating Pressure of 120 PSI
• Designed for moving large volumes of debris using air at standard shop pressures in noise-sensitive areas
HOW IT WORKS: COANDA NOZZLE
High-speed air jets exit from narrow openings around the nozzle, adhering to the conical face of the nozzle
The drive of the ambiant air allows an increased air thrust with a low noise level
Should the tip of the nozzle be blocked, the entire airflow will be diverted through the openings of the conical tip so the static pressure remains under 30 PSI (meets OSHA standards)
In addition, whisper jet blow gun also meets OSHA standards for noise level
• MAGNUM safety air guns are designed for use where maximum thrust is required
• MAGNUM blow guns meet or exceed OSHA and other Safety Agencies’ Standards of 30 PSI maximum pressure when dead ended up to 120 PSI inlet pressure
• Cleaning equipment, floors, machineries in noise-sensitive areas
• Maximum inlet pressure: 120 PSI
• Working Temperature Range: -40 to 150 °F (-40 to 65 °C)
• Connection: 3/8 (F) NPT
• Unique “Coanda” nozzle design reduces noise by up to 6 to 20 dB over conventional blow guns
• Up to 1.9 lbs of thrust at 100 PSI
• Static pressure limited to less than 30 PSI when tip is blocked
• Maximum air consumption: 39.4 SCFM
• 3/8 (F) NPT inlet
• Wide trigger for smoother actuation and comfort grip
• Maximum Operating Pressure of 120 PSI
• Designed for moving large volumes of debris using air at standard shop pressures in noise-sensitive areas
HOW IT WORKS: COANDA NOZZLE
High-speed air jets exit from narrow openings around the nozzle, adhering to the conical face of the nozzle
The drive of the ambiant air allows an increased air thrust with a low noise level
Should the tip of the nozzle be blocked, the entire airflow will be diverted through the openings of the conical tip so the static pressure remains under 30 PSI (meets OSHA standards)
In addition, whisper jet blow gun also meets OSHA standards for noise level
• MAGNUM safety air guns are designed for use where maximum thrust is required
• MAGNUM blow guns meet or exceed OSHA and other Safety Agencies’ Standards of 30 PSI maximum pressure when dead ended up to 120 PSI inlet pressure
• Cleaning equipment, floors, machineries in noise-sensitive areas
