• Red with 8 mm tube x 10 cm (4")
• Noise Level at 87 PSI: 84 dB
• Air Consumption at 87 PSI: 10.2 SCFM
• Maximum Working Pressure: 232 PSI
• Maximum Output Thrust at 116 PSI: 0.88 lbf
• Working Temperature: -10 to 80 °C
• Connection: 1/4 (F) NPT
Material(s):
• Body: Acetal plastic (POM)
• Nozzle: Plated steel/stainless steel/Aluminum
• Valve: Acetal plastic (POM)
• Springs: Stainless steel
• Seals: Nitrile rubber
• Provides a narrow and concentrated airflow
• Ergonomic design reduces hand fatigue and minimizes carpal tunnel syndrome
INSTALLATION TIP
For safe use, it is highly recommended to install an in-line preset regulator between the air system and the air hose
• TOPRING non-restricted blow guns are not provided with lateral holes to evacuate the excess of air in case of nozzle obstruction, neither a check valve inside the blow gun mechanism
• For safe use, it is highly recommended to install an in-line preset regulator between the air system and the air hose
• Users should never use blow guns to clean themselves
• A vacuum or a safety cleaning unit should be used instead
• Clearing away chips and shavings, cleaning of parts and machines, blowing, drying and dust removal from parts and work areas.
• For machine and woodworking shops, construction, lumber mills, paper mills, textile mills, foundries, transportation, bakeries and food processing, rubber and plastic manufacturing plants, general cleanup and maintenance
• Red with 8 mm tube x 10 cm (4")
• Noise Level at 87 PSI: 84 dB
• Air Consumption at 87 PSI: 10.2 SCFM
• Maximum Working Pressure: 232 PSI
• Maximum Output Thrust at 116 PSI: 0.88 lbf
• Working Temperature: -10 to 80 °C
• Connection: 1/4 (F) NPT
Material(s):
• Body: Acetal plastic (POM)
• Nozzle: Plated steel/stainless steel/Aluminum
• Valve: Acetal plastic (POM)
• Springs: Stainless steel
• Seals: Nitrile rubber
• Provides a narrow and concentrated airflow
• Ergonomic design reduces hand fatigue and minimizes carpal tunnel syndrome
INSTALLATION TIP
For safe use, it is highly recommended to install an in-line preset regulator between the air system and the air hose
• TOPRING non-restricted blow guns are not provided with lateral holes to evacuate the excess of air in case of nozzle obstruction, neither a check valve inside the blow gun mechanism
• For safe use, it is highly recommended to install an in-line preset regulator between the air system and the air hose
• Users should never use blow guns to clean themselves
• A vacuum or a safety cleaning unit should be used instead
• Clearing away chips and shavings, cleaning of parts and machines, blowing, drying and dust removal from parts and work areas.
• For machine and woodworking shops, construction, lumber mills, paper mills, textile mills, foundries, transportation, bakeries and food processing, rubber and plastic manufacturing plants, general cleanup and maintenance