• With 45 cm tube (18")
• Maximum Output Thrust: 0.9 lbf
• Noise Level: 101 dB
• Air Consumption: 13 SCFM
• Maximum Working Pressure: 120 PSI
• Working Temperautre: -40 to 65 °C
• Connection: 1/4 (F) NPT
Material(s):
• Body: Aluminum
• Nozzle: Brass
• Designed to move large volumes of debris using standard shop pressures
• Ergonomically designed to reduce hand fatigue and help minimize carpal tunnel syndrome
• Safe unique patented design
• Lightweight, rugged cast Aluminum body with rubber over-moulded trigger
• Venturi tip increases thrust
• If tip is blocked, static pressure will remain at less than 30 PSI to meet OSHA and other Health and Safety Agencies' standards
• Long tubes for hard-to-reach areas
• VENTURI NOZZLE: Airflow speeds up as it passes through the nozzle, drawing in ambient air through two side ports. The increased velocity and increased volume of air exiting the nozzle amplify thrust
HOW IT WORKS: VENTURI NOZZLE
Airflow speeds up as it passes through the nozzle, drawing in ambient air through two side ports. Increased velocity and volume of air exiting the nozzle boosts available air thrust
Should the tip of the nozzle be blocked, the entire airflow will be diverted through the slots so the static pressure remains under 30 PSI (meets OSHA standards)
• Users should never use blow guns to clean themselves
• A vacuum or a safety cleaning unit should be used instead
• Clearing away chips and shavings, cleaning of parts and machines, blowing, drying and dust removal from parts and work areas and general clean-up and maintenance
• Long tubes for blowing floor debris into piles, cleaning masonry forms, tanks, ovens, large molds, as well as machinery and storage areas
• With 45 cm tube (18")
• Maximum Output Thrust: 0.9 lbf
• Noise Level: 101 dB
• Air Consumption: 13 SCFM
• Maximum Working Pressure: 120 PSI
• Working Temperautre: -40 to 65 °C
• Connection: 1/4 (F) NPT
Material(s):
• Body: Aluminum
• Nozzle: Brass
• Designed to move large volumes of debris using standard shop pressures
• Ergonomically designed to reduce hand fatigue and help minimize carpal tunnel syndrome
• Safe unique patented design
• Lightweight, rugged cast Aluminum body with rubber over-moulded trigger
• Venturi tip increases thrust
• If tip is blocked, static pressure will remain at less than 30 PSI to meet OSHA and other Health and Safety Agencies' standards
• Long tubes for hard-to-reach areas
• VENTURI NOZZLE: Airflow speeds up as it passes through the nozzle, drawing in ambient air through two side ports. The increased velocity and increased volume of air exiting the nozzle amplify thrust
HOW IT WORKS: VENTURI NOZZLE
Airflow speeds up as it passes through the nozzle, drawing in ambient air through two side ports. Increased velocity and volume of air exiting the nozzle boosts available air thrust
Should the tip of the nozzle be blocked, the entire airflow will be diverted through the slots so the static pressure remains under 30 PSI (meets OSHA standards)
• Users should never use blow guns to clean themselves
• A vacuum or a safety cleaning unit should be used instead
• Clearing away chips and shavings, cleaning of parts and machines, blowing, drying and dust removal from parts and work areas and general clean-up and maintenance
• Long tubes for blowing floor debris into piles, cleaning masonry forms, tanks, ovens, large molds, as well as machinery and storage areas
