• Port Size: 1/4 (F) NPT
• Maximum Airflow at 100 PSI: 23 SCFM
• Ambient/Media Temperature: 4 to 52°C
• Maximum Working Pressure: 150 PSI
• Pressure Range: Standard bowl with semi-automatic drain: 15-125 PSI
• Filtration: 5 micron
• Bowl Capacity: 60 ml
• Standard Bowl: High-strength Polycarbonate
• Seals: Nitrile
• Designed to remove particulate material down to 5 micron from the airstream to protect downstream equipment
• Superior removal of free water up to 98% efficiency
• Superior pressure regulation - piston type regulator
• Self relieving design
• Push-pull adjusting knob
• External oil delivery adjusting knob
F/R+L assemblies provide the compactness needed where space is limited.
WHERE TO INSTALL A FILTER
Install the filter as far as possible from the compressor to allow the compressed air to cool and water vapors to condense. Removal of water in liquid form is more effective than removing water which is vapor form.
Install the filter closest to the tool and before the lubricator and regulator.
Always install the filter with the arrows pointing to the tool or application.
WHERE TO INSTALL A REGULATOR
Install the regulator on each pipe where applications and air tools requires different working pressure.
Always install the regulator downstream of a filter and upstream of a lubricator.
Can be installed vertically or horizontally.
Always install regulator with the arrows pointing to the tool or application.
WHERE TO INSTALL A LUBRICATOR
Install as close to the tool as possible, within 5 meters or 30 meters for micro-fog type lubricators.
Always install downstream of a filter and a regulator.
Ensure that the lubricator is easily accessible for filling pneumatic tool oil.
Always install with the arrows pointing to the tool or application.
• Port Size: 1/4 (F) NPT
• Maximum Airflow at 100 PSI: 23 SCFM
• Ambient/Media Temperature: 4 to 52°C
• Maximum Working Pressure: 150 PSI
• Pressure Range: Standard bowl with semi-automatic drain: 15-125 PSI
• Filtration: 5 micron
• Bowl Capacity: 60 ml
• Standard Bowl: High-strength Polycarbonate
• Seals: Nitrile
• Designed to remove particulate material down to 5 micron from the airstream to protect downstream equipment
• Superior removal of free water up to 98% efficiency
• Superior pressure regulation - piston type regulator
• Self relieving design
• Push-pull adjusting knob
• External oil delivery adjusting knob
F/R+L assemblies provide the compactness needed where space is limited.
WHERE TO INSTALL A FILTER
Install the filter as far as possible from the compressor to allow the compressed air to cool and water vapors to condense. Removal of water in liquid form is more effective than removing water which is vapor form.
Install the filter closest to the tool and before the lubricator and regulator.
Always install the filter with the arrows pointing to the tool or application.
WHERE TO INSTALL A REGULATOR
Install the regulator on each pipe where applications and air tools requires different working pressure.
Always install the regulator downstream of a filter and upstream of a lubricator.
Can be installed vertically or horizontally.
Always install regulator with the arrows pointing to the tool or application.
WHERE TO INSTALL A LUBRICATOR
Install as close to the tool as possible, within 5 meters or 30 meters for micro-fog type lubricators.
Always install downstream of a filter and a regulator.
Ensure that the lubricator is easily accessible for filling pneumatic tool oil.
Always install with the arrows pointing to the tool or application.
