• Port Size: 3/8 (F) NPT
• Maximum Airflow at 100 PSI: 45 SCFM
• Maximum Working Pressure: 150 PSI
• Working Temperature: 4 to 52 °C
• Working Pressure: 0-125 PSI
• Filtration: 5 microns
• Drain: Internal automatic drain
• Bowl Capacity: 112.4 ml
• Pressure Gauge Port Size: 1/8 (F) NPT
Material(s):
• Body: Zinc
• Spring Cage: Acetal
• Bowl: Polyurethane with guard
• High performance combination of 3 units which disassemble easily
• High-flow design
• Removes contaminants down to 5 microns in size
• Removes water through centrifugal force
• Maintains constant downstream pressure
• Push-pull Adjusting Knob
• Precision needle assures repeatable oil delivery and provides simple adjustment of delivery rates
• Automatic drain available
INSTALLATION TIP
Assembly is simple using Allen key style screws and an O-ring
Units can be quickly and easily assembled and disassembled
The lubricator should be installed within 5 meters of the application
Available with piping adapters: add suffix .01
WHERE TO INSTALL A FILTER
Install the filter as far as possible from the compressor to allow the compressed air to cool and water vapors to condense. Removal of water in liquid form is more effective than removing water which is vapor form.
Install the filter closest to the tool and before the lubricator and regulator
Always install the filter with the arrows pointing to the tool or application
WHERE TO INSTALL A REGULATOR
Install the regulator on each pipe where applications and air tools requires different working pressure
Always install the regulator downstream of a filter and upstream of a lubricator
Can be installed vertically or horizontally
Always install regulator with the arrows pointing to the tool or application
WHERE TO INSTALL A LUBRICATOR
Install as close to the tool as possible, within 5 meters or 30 meters for micro-fog type lubricators
Always install downstream of a filter and a regulator
Ensure that the lubricator is easily accessible for filling pneumatic tool oil
Always install with the arrows pointing to the tool or application
O-Ring and Screws MEDIUM
Manual Drain (Short) S50 MINI-MED-MAXI and S52
Bowl Polyurethane L MEDIUM
Bowl Polyurethane F, FC, F/R Auto MEDIUM
Auto Drain 175PSI - F,FC,F/R MED-MAXI & F,F/R HIFL
Spring S50 MEDIUM (2-125 PSI)
Push-Pull Adjusting Knob R, F/R MEDIUM
Relieving Diaph. & Valve R, F/R MEDIUM
Sight Dome for L MINI, MEDIUM & MAXI
Deflector + Retainer F, F/R MEDIUM
Element 5 mic F, F/R MEDIUM
• Port Size: 3/8 (F) NPT
• Maximum Airflow at 100 PSI: 45 SCFM
• Maximum Working Pressure: 150 PSI
• Working Temperature: 4 to 52 °C
• Working Pressure: 0-125 PSI
• Filtration: 5 microns
• Drain: Internal automatic drain
• Bowl Capacity: 112.4 ml
• Pressure Gauge Port Size: 1/8 (F) NPT
Material(s):
• Body: Zinc
• Spring Cage: Acetal
• Bowl: Polyurethane with guard
• High performance combination of 3 units which disassemble easily
• High-flow design
• Removes contaminants down to 5 microns in size
• Removes water through centrifugal force
• Maintains constant downstream pressure
• Push-pull Adjusting Knob
• Precision needle assures repeatable oil delivery and provides simple adjustment of delivery rates
• Automatic drain available
INSTALLATION TIP
Assembly is simple using Allen key style screws and an O-ring
Units can be quickly and easily assembled and disassembled
The lubricator should be installed within 5 meters of the application
Available with piping adapters: add suffix .01
WHERE TO INSTALL A FILTER
Install the filter as far as possible from the compressor to allow the compressed air to cool and water vapors to condense. Removal of water in liquid form is more effective than removing water which is vapor form.
Install the filter closest to the tool and before the lubricator and regulator
Always install the filter with the arrows pointing to the tool or application
WHERE TO INSTALL A REGULATOR
Install the regulator on each pipe where applications and air tools requires different working pressure
Always install the regulator downstream of a filter and upstream of a lubricator
Can be installed vertically or horizontally
Always install regulator with the arrows pointing to the tool or application
WHERE TO INSTALL A LUBRICATOR
Install as close to the tool as possible, within 5 meters or 30 meters for micro-fog type lubricators
Always install downstream of a filter and a regulator
Ensure that the lubricator is easily accessible for filling pneumatic tool oil
Always install with the arrows pointing to the tool or application
