• Port Size: 3/8 (F) NPT
• Maximum Airflow at 100 PSI: 60 SCFM
• Maximum Working Pressure: 250 PSI
• Pressure Range: 2-125 PSI
• Working Temperature: 0 to 80 °C
• Filtration: Standard 40 microns / Optional 5 microns
• Drain: Automatic
• Bowl Capacity: Filter: 130.1 ml • Lubricator: 76.9 ml
• Pressure Gauge Port Size: 1/4 (F) NPT
Material(s):
• Bowl Type: Zinc
• High flow design
• Removes contaminants down to 40 microns in size
• Removes water through centrifugal force
• Maintains constant downstream pressure
• Provides quick response to pressure adjustments
• Lubrication automatically proportioned to airflow, eliminating readjustment
• Automatic drain available
INSTALLATION TIP
Lubrication up to 30 meters HIFLO2 lubricators are designed to lubricate a tool through a hose of up to 30 meters (100 feet length) from the outlet of the lubricator.
Standard lubricators lubricate up to 5 meters from the outlet.
Also available with a 5 micron element: add sufix .05
WHERE TO INSTALL A FILTER
Install the filter as far as possible from the compressor to allow the compressed air to cool and water vapors to condense. Removal of water in liquid form is more effective than removing water which is vapor form.
Install the filter closest to the tool and before the lubricator and regulator
Always install the filter with the arrows pointing to the tool or application
WHERE TO INSTALL A REGULATOR
Install the regulator on each pipe where applications and air tools requires different working pressure
Always install the regulator downstream of a filter and upstream of a lubricator
Can be installed vertically or horizontally
Always install regulator with the arrows pointing to the tool or application
WHERE TO INSTALL A LUBRICATOR
Install as close to the tool as possible, within 5 meters or 30 meters for micro-fog type lubricators
Always install downstream of a filter and a regulator
Ensure that the lubricator is easily accessible for filling pneumatic tool oil
Always install with the arrows pointing to the tool or application
Bowl Zinc+sightglass L 1/4-3/8-1/2 HIFLO2
Bowl Zinc+sight F,FC,F/R 1/4-3/8-1/2 Auto HIFLO2
Auto Drain 250PSI F,FC,F/R 1/4-3/8-1/2 HIFLO2
Deflector + Retainer F, F/R 1/4-3/8-1/2 HIFLO2
Element 5 mic F, F/R 1/4-3/8-1/2 HIFLO2
Element 40 mic F, F/R 1/4-3/8-1/2 HIFLO2
Sight Glass Ass'y F,FC,F/R,L 1/4-3/8-1/2 HIFLO2
• Port Size: 3/8 (F) NPT
• Maximum Airflow at 100 PSI: 60 SCFM
• Maximum Working Pressure: 250 PSI
• Pressure Range: 2-125 PSI
• Working Temperature: 0 to 80 °C
• Filtration: Standard 40 microns / Optional 5 microns
• Drain: Automatic
• Bowl Capacity: Filter: 130.1 ml • Lubricator: 76.9 ml
• Pressure Gauge Port Size: 1/4 (F) NPT
Material(s):
• Bowl Type: Zinc
• High flow design
• Removes contaminants down to 40 microns in size
• Removes water through centrifugal force
• Maintains constant downstream pressure
• Provides quick response to pressure adjustments
• Lubrication automatically proportioned to airflow, eliminating readjustment
• Automatic drain available
INSTALLATION TIP
Lubrication up to 30 meters HIFLO2 lubricators are designed to lubricate a tool through a hose of up to 30 meters (100 feet length) from the outlet of the lubricator.
Standard lubricators lubricate up to 5 meters from the outlet.
Also available with a 5 micron element: add sufix .05
WHERE TO INSTALL A FILTER
Install the filter as far as possible from the compressor to allow the compressed air to cool and water vapors to condense. Removal of water in liquid form is more effective than removing water which is vapor form.
Install the filter closest to the tool and before the lubricator and regulator
Always install the filter with the arrows pointing to the tool or application
WHERE TO INSTALL A REGULATOR
Install the regulator on each pipe where applications and air tools requires different working pressure
Always install the regulator downstream of a filter and upstream of a lubricator
Can be installed vertically or horizontally
Always install regulator with the arrows pointing to the tool or application
WHERE TO INSTALL A LUBRICATOR
Install as close to the tool as possible, within 5 meters or 30 meters for micro-fog type lubricators
Always install downstream of a filter and a regulator
Ensure that the lubricator is easily accessible for filling pneumatic tool oil
Always install with the arrows pointing to the tool or application
