• Port Size: 1 (F) NPT
• Maximum Airflow at 100 PSI: 300 SCFM
• Maximum Working Pressure: Manual Drain: 250 PSI
• Working Temperature: Manual Drain: 4 to 66 °C
• Filtration: Standard 40 microns / Optional 5 microns
• Drain: Manual
• Bowl Capacity: 0.5 L
Material(s):
• Body Material(s): Zinc (Aluminum for 2 NPT)
• Bowl Type: Zinc
• High flow design
• Removes contaminants down to 40 microns in size
• Removes water through centrifugal force
• Automatic drain available
WHERE TO INSTALL A FILTER
Install the filter as far as possible from the compressor to allow the compressed air to cool and water vapors to condense. Removal of water in liquid form is more effective than removing water which is vapor form.
Install the filter closest to the tool and before the lubricator and regulator
Always install the filter with the arrows pointing to the tool or application
Also available with a 5 micron element: add sufix .05
• Port Size: 1 (F) NPT
• Maximum Airflow at 100 PSI: 300 SCFM
• Maximum Working Pressure: Manual Drain: 250 PSI
• Working Temperature: Manual Drain: 4 to 66 °C
• Filtration: Standard 40 microns / Optional 5 microns
• Drain: Manual
• Bowl Capacity: 0.5 L
Material(s):
• Body Material(s): Zinc (Aluminum for 2 NPT)
• Bowl Type: Zinc
• High flow design
• Removes contaminants down to 40 microns in size
• Removes water through centrifugal force
• Automatic drain available
WHERE TO INSTALL A FILTER
Install the filter as far as possible from the compressor to allow the compressed air to cool and water vapors to condense. Removal of water in liquid form is more effective than removing water which is vapor form.
Install the filter closest to the tool and before the lubricator and regulator
Always install the filter with the arrows pointing to the tool or application
Also available with a 5 micron element: add sufix .05