Technical specifications and certifications

• Port Size: 3/8 (F) NPT
• Maximum Airflow at 100 PSI: 28 SCFM
• Maximum Working Pressure: 150 PSI
• Working Temperature: 5 to 60°C
• Filtration: 0.3 micron

Drain
• Standard Bowl: Semi-automatic • 8 mm O.D. tubing
• Bowl Capacity: 45 ml

Materials
• Body Material: Die cast aluminum
• Bowl Type: Polycarbonate with steel guard
• Bowl Guard: Steel
• Regulation Type: Relieving
• Filter Element: coalescing filter: Fiberglass paper, 0.3 micron
• Deflector & Spinner: ABS
• O-Rings & Seals: EPDM rubber

Features and benefits

• Compact size
• High performance filter that removes 99.97% of solid particles, oil and water aerosols greater than 0.3 micron
• Standard semi-automatic drain requires a simple tug of the ring to drain
• Mounting bracket included

Operation and installation

WHERE TO INSTALL A FILTER
Install the filter as far as possible from the compressor to allow the compressed air to cool and water vapors to condense. Removal of water in liquid form is more effective than removing water which is vapor form.
Install the filter closest to the tool and before the lubricator and regulator.
Always install the filter with the arrows pointing to the tool or application.

INSTALLATION TIP
A general purpose filter must be installed ahead of a coalescing filter to ensure good performance and to extend the life of the coalescing filter.