• Port Size: 3/8 (F) NPT
• Maximum Airflow at 100 PSI: 53 SCFM
• Maximum Working Pressure: 150 PSI
• Working Temperature: 5 to 60°C
• Filtration: 5 micron
Drain
• Metal Bowl: Automatic • 1/8 (M) NPT
• Bowl Capacity: 20 ml
Materials
• Body Material: Die cast aluminum
• Bowl Type: Aluminum
• Bowl Guard: Steel
• Filter Element: filter: Polyethylene, 5 micron
• Deflector & Spinner: ABS
• O-Rings & Seals: EPDM rubber
• Compact size
• Removes water through centrifugal force
• Removes contaminants down to 5 micron in size
• Mounting bracket included
WHERE TO INSTALL A FILTER
Install the filter as far as possible from the compressor to allow the compressed air to cool and water vapors to condense. Removal of water in liquid form is more effective than removing water which is vapor form.
Install the filter closest to the tool and before the lubricator and regulator.
Always install the filter with the arrows pointing to the tool or application.
• Port Size: 3/8 (F) NPT
• Maximum Airflow at 100 PSI: 53 SCFM
• Maximum Working Pressure: 150 PSI
• Working Temperature: 5 to 60°C
• Filtration: 5 micron
Drain
• Metal Bowl: Automatic • 1/8 (M) NPT
• Bowl Capacity: 20 ml
Materials
• Body Material: Die cast aluminum
• Bowl Type: Aluminum
• Bowl Guard: Steel
• Filter Element: filter: Polyethylene, 5 micron
• Deflector & Spinner: ABS
• O-Rings & Seals: EPDM rubber
• Compact size
• Removes water through centrifugal force
• Removes contaminants down to 5 micron in size
• Mounting bracket included
WHERE TO INSTALL A FILTER
Install the filter as far as possible from the compressor to allow the compressed air to cool and water vapors to condense. Removal of water in liquid form is more effective than removing water which is vapor form.
Install the filter closest to the tool and before the lubricator and regulator.
Always install the filter with the arrows pointing to the tool or application.
