Technical specifications and certifications

• Port Size: 1/4 (F) NPT
• Maximum Airflow at 100 PSI: 19 SCFM
• Maximum Working Pressure: 150 PSI
• Pressure Range: 5-30 PSI • 5-60 PSI
• Working Temperature: 5 to 60°C
• Filtration: 5 micron

Drain
• Metal Bowl: Semi-automatic • (F) M5
• Bowl Capacity: 15 ml
• Pressure Gauge Port Size: 1/8 (F) NPT

Materials
• Body Material: Die cast aluminum
• Bowl Type: Aluminum
• Bowl Guard: Steel
• Filter Element: Polyethylene, 5 micron
• Deflector & Spinner: ABS
• O-Rings & Seals: EPDM rubber
• Regulator Cap: Reinforced nylon
• Regulator Adjusting Knob: Reinforced nylon
• Diaphragm: EPDM rubber
• Poppet Valve: Brass and rubber
• Regulator Spring: Stainless steel

Features and benefits

• Space saving integrated filter/regulator design
• Removes water through centrifugal force
• Removes contaminants down to 5 micron in size
• Accurate pressure control with little drift
• Removable locking push-pull adjusting knob
• Pressure gauge and mounting bracket included

Operation and installation

WHERE TO INSTALL A FILTER
Install the filter as far as possible from the compressor to allow the compressed air to cool and water vapors to condense. Removal of water in liquid form is more effective than removing water which is vapor form.
Install the filter closest to the tool and before the lubricator and regulator.
Always install the filter with the arrows pointing to the tool or application.

WHERE TO INSTALL A REGULATOR
Install the regulator on each pipe where applications and air tools requires different working pressure.
Always install the regulator downstream of a filter and upstream of a lubricator.
Can be installed vertically or horizontally.
Always install regulator with the arrows pointing to the tool or application.